VEGA VIB S61系列振动开关产品数据表

VEG***IB S 61 

Vibrating level switch for granulates 
Easy setup without adjustment 
Product-independent switching point 
Optimum rod design ***oids buildup and jamming 
Easy cleaning 
Wear and maintenance free 

Function 
The vibrating rod of VEG***IB is energized by a piezo crystal and it vibrates at a fixed amplitude. If the vibrating rod is covered by product, the amplitude change is detected by the integral electronics and converted into a switch signal. The switching condition is visible from outside via a two colour LED. No special adjustments are required to set up VEG***IB S 61.

Area of application 

VEG***IB S 61 is used as a level switch in free flowing powders, granulates and coarse grained solids and detects reliably and accurately when a point level is reached. The optimum rod design ***oids jamming and buildup of bulk solid material. It is ideal as a high or low level switch in a vessel detecting foodstuffs, perishable or granulate materials,which could be retained in a fork solids level probe. 

Technical data

Process pressure   -1…16 bar Process temperature   -50…  +150℃ Density  ≥ 100 g/l  Material housing   plastic PBT  Protection    IP 66/IP 67  Materials, wetted parts   316L  Approval    option: ATEX II 1/3 D IP6X T  Electronics transistor (NPN/PNP)  Load current    max. 400 mA  Turn-on voltage   max. 55 V DC  Supply voltage    10…55 V DC  Power c***umption   max. 0.5 W  Electronics double relay (DPDT)  Supply voltage    20…253 V AC, 50/60 Hz, 20…72 V DC  Power c***umption   1…8 VA (AC), approx. 1.3 W (DC)  Turn-on voltage   min. 10 mV / max. 253 V AC/DC  Switching current   min. 10 μA / max. 3 A AC, 1 A DC  Breaking capacity   max. 750 VA, 54

Accessories:Sliding lock fitting (extended versi***) pressurised or unpressurised for adjustable switch point

VEG***IB S 61
振动极限开关，用于颗粒状的固料
安装方便, 无需调整
产品***开关点
优化杆设计避免了堆积和干扰
易清洗

功能
VEG***IB 的振动杆由压电晶体激发, 并以固定振幅振动。如果振动杆被产品覆盖, 则通过整体电子学检测振幅变化并转换成开关信号。开关情况从外面是可看见的通过LED指示灯显示。设置 VEG***IB S 61 不需要进行特殊调整。

应用领域
VEG***IB S 61 在自由流动的粉末、颗粒和粗粒固体中被用作电平开关, 并在达到点水平时进行可靠和准确的检测。***优杆设计避免了大块固体材料的干扰和堆积。它是理想的作为一个高或低电平开关的船舶检测食品, 易腐或粒材料, 这可以保留在一个叉子固体水平探头。

技术资料

工艺压力-1..。16 bar 工艺温度-50... + 150℃ 密度≥100克/升 材料外壳塑料 PBT 保护 ip 66/ip 67 材料, 湿部316L 批准选项: ATEX II 1/3 D IP6X T
	电子晶体管 (NPN/PNP) 负载电流***大值400 mA 开启电压***大值55 V DC 电源电压 10…55 V DC 功耗***大值0.5 W
电子双继电器 (双) 电源电压 20…253伏 AC, 50/60 赫兹, 20…72 V DC 功耗 1…8 VA (AC), 约 1.3 W (DC) 开启电压***小10毫伏/***大 253 V 交/直流 开关电流***小 10 a/***大值3 a AC, 1 DC ***大***容量750 VA, 54 W

附件: 滑动锁配件 (扩展版) 加压或 unpressurised 可调开关点

以上即为VEGA VIB S61 6263的相关介绍，如有任何技术咨询或需要相关技术资料，请前往www.ize-industries.ｃｏｍ相关页面进行***。