爱泽工业2018年4月部分到货产品专题及库存 MR CHEM

 

如下为我司爱泽工业IZE_Industries本月部分到货MR CHEMIE相关产品，欢迎来电索取样本资料和产品信息。

 

                                          MR CHEMIE清洁剂、显像剂、磁悬液 爱泽工业izeindustries到货图集

 

德国MR CHEMIE清洁剂MR85产品描述

General appearance and composition:

Mixture of solvents based on alcohol, method C according to EN ISO 3452-1

Dries slowly

Flash point material +13 °C

Suitable for all metals (suitability for plastics needs testing prior to use)

Processing temperature -10 to +50 °C

Aerosol can overhead sprayable

 

Relevant approvals and specificati***

Sample testing acc. to EN ISO 3452-2 and ISO 3452-6

Low content of halogens and sulphur according to EN ISO 3452-2

and A***E Code V, Section V, Article 6

In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas, admitted

by Framatome ANP

 

Application:

Remove tinder, rust and other contaminati*** from surface in a suitable manner.

You can use MR85 Remover as precleaner for removal of oils or fats.Apply MRPenetrant to the part to be tested either by spraying, brushing, flooding

or dipping. Allow to penetrate for at least 5 minutes.Remove excess MRPenetrant from surface using a clean lint-free cloth lightly

moistened with MR85 Remover.Spray MR? Developer (e.g. MR70) from a distance of approx. 20 cm on the dry

surface, achieving a thin, uniform layer. Depending on the used penetrant, surface

defects will appear as red or fluorescent indicati***. Please note: If the developer

layer is too thick tiny discontinuities will not appear through the developer.

 

Minimum shelf life:

Will keep for a minimum of 4 years, stored at room temperature

Pack sizes:

Aerosols, 500 ml (1 box contains 12 aerosols)

5 L, 30 L, 200 L

Valve pen (Piccolo-Pen)

MR CHEMIE清洁剂MR85爱泽工业izeindustries发货照片

 

爱泽工业(IZE_INDUSTRIE***R CHEMIE)***经销、常用备件型号：

MR CHEMIE清洁剂MR79

MR CHEMIE清洁剂MR85

MR CHEMIE清洁剂MR88

MR CHEMIE清洁剂MR91

 

德国MR CHEMIE显像剂MR70产品描述

General appearance and composition:

Solvent removable developer for red and fluorescent penetrant testingform d and e according to EN ISO 3452-1

Water mixable

Dries quickly

Processing temperature -30 °C to +50 °C

Aerosol overhead sprayable

 

Relevant approvals and specificati***

Sample testing acc. to EN ISO 3452-2 and EN ISO 3452-6

Low content of halogens and sulphur according to EN ISO 3452-2and A***E Code V, Section V, Article 6

In correspondence with Lloyd's Reg., Bureau Veritas, Det Norske Veritas,admitted by Framatome ANP

Produits et Matériaux Utilisables en Centrales (PMUC)

TLV 9017 01:2011-01

 

Application:

Remove tinder, rust and other contaminati*** from surface in a suitable manner. A

possible precleaner for removal of oils or fats is e.g. our remover MR? 79.

Apply MR?Penetrant to the part to be tested either by spraying, brushing, flooding

or dipping. Allow to penetrate for at least 5 minutes.

Remove excess MR?Penetrant from surface either using water or a clean lint-free

cloth lightly moistened with an MR? Remover.

Spray MR? 70 Developer from a distance of approx. 20 cm on the dry surface,

achieving a thin, uniform layer. Depending on the used penetrant, surface defects

will appear as red or fluorescent indicati***. Please note: If the developer layer istoo thick tiny discontinuities will not appear through the developer.

When using a spray gun connected to compressed air it must be ensured that the

supplied air is free of water and fat.

 

Minimum shelf life:

Will keep for a minimum of 4 years, stored at room temperature

Pack sizes:

Aerosols, 500 ml (1 box contains 12 aerosols)

5 L, 30 L

Valve pen

MR CHEMIE显像剂MR70爱泽工业izeindustries发货照片

 

爱泽工业(IZE_INDUSTRIE***R CHEMIE)***经销、常用备件型号：

MR CHEMIE显像剂MR70

MR CHEMIE显像剂MR81

MR CHEMIE显像剂MR703W

MR CHEMIE显像剂MR703WK

 

MR CHEMIE磁悬液MR76Scomposition:

Mixture of isoparaffinic carbonhydroxides, additives and pigments

Serves to indicate cracks when performing coloured magnetic particle inspection

Medium particle size da = 1-3 µm

Flashpoint 84°C

Sediment: 0,4 – 0,8 ml/100 ml (1 h)

Low odour

Aerosol cans over head sprayable

MR CHEMIE磁悬液MR76S的组成:

异链烷烃碳氢化合物，添加剂和颜料的混合物

用于在进行彩色磁粉检查时表示裂纹

中等粒径：da = 1-3 µm

闪点84°C

沉淀物：0.4?0.8ml / 100ml（1小时）

低气味

气溶胶罐头可喷雾

 

MR CHEMIE磁悬液MR76S爱泽工业izeindustries发货照片

 

爱泽工业(IZE INDUSTRIES)***经销、常用备件型号：

MR CHEMIE渗透剂MR67

MR CHEMIE渗透剂MR67DL

MR CHEMIE渗透剂MR67PS

MR CHEMIE渗透剂MR68NF

MR CHEMIE渗透剂MR68H

MR CHEMIE渗透剂MR68C

MR CHEMIE渗透剂MR312

MR CHEMIE渗透剂MR311-R

MR CHEMIE渗透剂MR313

MR CHEMIE渗透剂MR313DL

MR CHEMIE渗透剂MR699FA

MR CHEMIE渗透剂MR660

MR CHEMIE渗透剂MR670F

MR CHEMIE渗透剂MR671F

MR CHEMIE渗透剂MR672F

MR CHEMIE渗透剂MR673F

MR CHEMIE渗透剂MR70

MR CHEMIE渗透剂MR70H

MR CHEMIE渗透剂MR81T-R

MR CHEMIE渗透剂MR703W

MR CHEMIE渗透剂MR703WK

MR CHEMIE渗透剂MR79

MR CHEMIE渗透剂MR85

MR CHEMIE渗透剂MR88

MR CHEMIE渗透剂MR91H

MR CHEMIE渗透剂MR3001

MR CHEMIE渗透剂MR3002

 

                                       MR CHEMIE清洁剂、显像剂、磁悬液 爱泽工业izeindustries到货图集

 

以上为本月部分到货MR CHEMIE产品，爱泽工业***提供MR CHEMIE全系列产品，MR CHEMIE清洁剂MR85，MR CHEMIE显像剂MR70，MR CHEMIE磁悬液MR76S等等。

 

如果您有任何关于产品的相关疑问，请随时与我们联系，爱泽工业(021-3100 6702)。我们将尽全力解决您的问题。